Services

See the services I offer below sorted by whether the job can be performed on-site or will need to be taken back to my workshop.

I charge $20 on top of services to perform on-site or pickup/dropoff.

On-Site

The following services can be done wherever you need, as long as there is a table and a calm space!

$30
Dust and polish, fret polish, oil ebony fretboard, restring with fresh strings (D'Addario 10s) or with requested strings
$70
Dust and clean, fret polish, oil ebony fretboard, restring with fresh strings (D'Addario 10s) or with requested strings, truss rod adjustment, saddle height action adjustment, nut slot adjustment, check for high frets, check electronics (if applicable)
$80
Dust and clean, fret polish, oil ebony fretboard, electronics cleaning, restring with fresh strings (D'Addario 10s) or with requested strings, truss rod adjustment, bridge action adjustment (set radius on individual saddles if applicable), nut slot adjustment, pickup height adjustment, set intonation, check for high frets, set tremolo (if requested)
- Pickup - $50 each
- Acoustic Pickup - $100
- Potentiometer - $25 each
- Switch - $50 (+$25 for uncommon switch)
- Output Jack - $25
- Strap Button - $10 each
- Tuners - $50

Some jobs require space and time to complete, so these services I can pickup and dropoff to complete them at my workshop!

- Finish Crack (Drop Fill) - $30 per crack
- Acoustic Body Crack Small - $75
- Acoustic Body Crack Large - $150
- Acoustic Brace Reglue - $30/hr
- Cracked Headstock - $150
- Broken Headstock - $300
Prefab Nut - $40
Custom Shaped Nut - $75
Prefab Saddle - $40
Custom Shaped Saddle - $7
$300 (+$50 for reducing bellying)
$200 (+50 for hollowbody)
Completely rewire your guitar with new electronic parts for a new sound!
$250 (Includes Setup)
Get the most playability from your frets! Levels all frets to be even with each other to remove buzzing and provide a great playing experience!
$350 (Includes Setup)
Replace worn frets or change to a different fret gauge, level/crown/polish. Nickel/silver or EVO only. Do not do Stainless Steel fret jobs. Partial refrets on an estimate basis.
+$50 if binding on neck. For maple fretboards, inquire for estimate.